Soliton Bus Model¶
This page documents the finite transport and operator contracts in
Signals.SolitonBus. The source chats describe a proposed N-LIG/Lignolux
architecture.
Chat-Derived Design¶
The reviewed chat corpus groups the bus design into four related layers:
Layer |
Chat-derived proposal |
Model boundary |
|---|---|---|
Multiplexing |
WDM, MDM, OAM, and A2Q soliton-bus addressing |
Lane addresses and selectors are finite data; they do not prove independent physical channels. |
Routing |
Thermo-optic address trees, demultiplexers, bucket-brigade routing, and OAM sorting |
|
Readout |
Kerr cross-phase modulation, probe-beam phase shifts, and homodyne detection |
The phase relation is a conditional interaction contract; it is not a proof of nondestructive quantum measurement. |
Operators |
Gaussian quadrature operations, beam splitters, phase gates, CNOT-like gates, and nonlinear phase interactions |
Finite matrices and phase-space maps are implemented; material coupling and universal hardware operation are not inferred. |
The source request explicitly groups WDM, MDM, OAM, A2Q, squeezed-state readout, and nondestructive phase measurement in the signal-phase chat. The same chat proposes OAM encoding and a Kerr probe path at the bus design section. The proposed N-LIG architecture also describes the signal bus, OAM qudit payload, and a Kerr cavity in the interaction-zone design.
The separate architecture chat proposes wavelength as a coarse address and a thermo-optic layer as a fine decoder in its address-tree description. It describes bucket-brigade routing as a simulation target, with switch latency and loss as quantities to measure in the network-routing plan.
Classical Transport API¶
LaneAddress represents five independent multiplexing coordinates:
wavelength channel for WDM;
spatial mode for MDM;
integer orbital-angular-momentum charge;
polarization channel;
time slot for TDM.
LaneSelector enables any subset of those coordinates. demultiplex filters
finite frame lists by the enabled selector fields. BusNetwork and
RoutingPlan represent a finite lane fabric; the route map must be injective,
so the contract does not silently merge two source lanes. broadcastLanes
represents a finite bucket-brigade fan-out.
The classical logic inventory includes identity, NOT, NAND, AND, OR, XOR, XNOR,
and NOR. The lemmas nand_complete_not, nand_complete_and, and
nand_complete_or show the usual NAND-derived identities for Boolean values.
The inventory is complete as a finite Boolean operator set; it is not a
throughput or hardware-timing claim.
Quantum and CV Operators¶
The module uses explicit finite complex matrices and amplitude-vector application, so it does not require a second Lean package or silently import a different mathlib build.
The finite one-qubit inventory contains:
Pauli X, Y, and Z;
Hadamard, also exposed as the balanced dual-rail beam-splitter matrix;
parameterized unit-modulus phase gates.
The multi-mode inventory contains explicit CNOT, SWAP, controlled-phase, and Toffoli matrices. Standard one-qubit operators carry checked finite unitarity lemmas. Multi-qubit matrices remain explicit operator data until their permutation-unitarity lemmas are added.
The finite quadrature layer supplies displacement, phase rotation, reciprocal squeezing, balanced beam splitting, Kerr phase shift, and cross-phase modulation. These are finite mathematical operators, not claims that N-LIG provides the required nonlinear coefficient or low-loss quantum regime.
The chat proposal describes Gaussian rotations and squeezing together with a
Kerr/non-Gaussian path in data/chats/Breakthrough-in-Extreme-Dielectric-Nanolasers.md
and proposes cross-phase modulation between OAM solitons in that same chat.
Those claims remain conditional in the model.
Dynamics Contracts¶
The propagation layer now records the standard finite nonlinear-envelope quantities used in hollow-core soliton work:
SolitonPropagationDynamics stores the pulse duration \(T_0\), peak power
\(P_0\), anomalous group-velocity dispersion \(\beta_2\), nonlinear coefficient
\(\gamma\), both characteristic lengths, and the supplied soliton order. The
record also keeps self-compression and resonant-dispersive-wave observations as
hypotheses, because those outcomes depend on gas pressure, core geometry,
loss, mode matching, and photoionization.
SolitonCollisionDynamics makes the two-pulse interaction explicit:
The phase law is checked algebraically. The coefficient includes the chosen XPM convention and modal-overlap factor; it is not a universal material constant. Collision observation, nonabsorption, and crosstalk remain measured or conditional fields. This is the appropriate boundary for XPM and Kerr proposals: a formula for phase shift is not a demonstrated single-photon gate.
This is also a review correction: the phase shift is driven by the interacting signal power, not by the probe power being phase-shifted. Both powers remain in the record so self-phase, probe loading, and collision bookkeeping can be extended without changing the meaning of the XPM law.
OAMMultiplexingObservation records fibre length, mode-group count, symbol
rate, data rate, modal crosstalk, and MIMO equalizer order. The long-haul OAM
experiment below demonstrates modal transport and equalization, but it does
not demonstrate soliton propagation or N-LIG fabrication.
SolitonDynamicsOperator.defaultPlacement separates operator location:
Placement |
Operators |
Interpretation |
|---|---|---|
|
linear propagation, self-phase modulation, XPM, self-compression, OAM mode coupling |
Co-propagating or in-guide dynamics, subject to dispersion, loss, and modal calibration. |
|
resonant dispersive-wave generation, parity measurement |
Requires a spectral or measurement boundary; not a transparent bus primitive by default. |
|
homodyne readout |
A detector/local oscillator path outside the transported signal mode. |
Multi-Lane (\(N > 0\)) Interferometric Couplers, \(Gr_{\mathbb{C}}(2,4)\) Twistor Channels, and Yang–Baxter Soliton Collisions¶
In src/signals/Signals/SolitonBus.lean,
SolitonMultiLaneCoupler connects the \(N\)-lane soliton-bus architecture to the
multi-model interferometric and Quantum Inverse Scattering frameworks developed
in grassmannian-huygens-double-slit-oam-paper.md
and grassmannian-qism-bethe-ansatz-paper.md:
\(N\)-Lane (\(N > 0\)) Grating Coupler & Barycentric Power Imbalance (
SolitonMultiLaneCoupler): Parameterized by lane countnumLanes > 0, lane aperture width \(a > 0\), lane height \(b > 0\), center-to-center waveguide pitch \(d > 0\), wavelength \(\lambda > 0\), coupler distance \(L > 0\), barycentric lane-imbalance shift \(d_{\mathrm{bary}} \in [-1, 1]\), visibility \(\mathcal{V} \in [0, 1]\), and differential OAM topological charge \(\Delta\ell \in \mathbb{Z}\):For \(N = 1\) lane (
SolitonMultiLaneCoupler.singleLane_intensity), the coupler output reduces identically to the single-waveguide envelope \(I_0 E_{\mathrm{slit}}(x, y)\).For \(N = 2\) lanes (
SolitonMultiLaneCoupler.dualLane_intensity_eq_huygensSteinerOAM), the output matcheshuygensSteinerOAMDoubleSlitidentically.
Complex \(Gr_{\mathbb{C}}(2,4)\) Twistor Coupler Representation (
SolitonMultiLaneCoupler.dualLane_complexGr24_eq_huygensSteinerOAM): Encoding a dual-rail OAM soliton coupler in the complex Grassmannian \(Gr_{\mathbb{C}}(2,4)\) with \(\mathbb{C}^4\)-projected twistor entries\[ z_{1,2} = \sqrt{1 \pm d_{\mathrm{bary}}}\,e^{\pm i\left(\frac{\pi d x}{\lambda L} + \frac{\Delta\ell\,\phi}{2}\right)} \]reproduces the partially coherent Huygens–Steiner OAM coupler output with visibility \(\mathcal{V} = \sqrt{1 - d_{\mathrm{bary}}^2}\) identically across all \((x, y, \phi)\) with zero relative predictive error, eliminating the \(50\%\) error of unphased \(Gr_{\ge 0}(2,4)\) crossing-minor proxies.
Three-Soliton Yang–Baxter Collision Order Independence (
solitonThreeWaveguide_yang_baxter_consistency): When three soliton lanes with spectral rapidities \((u, v, w)\) and coupling \(\eta\) interact pairwise in an integrable NLSE / Yangian zone,solitonThreeWaveguide_yang_baxter_consistencycombinesSignals.QISM.yang_baxter_equation_matrix8andSignals.QISM.baxterTQResidual_wronskian_zeroto certify that the \(8 \times 8\) three-mode scattering product satisfies\[ R_{12}(u-v;\eta)\,R_{13}(u-w;\eta)\,R_{23}(v-w;\eta) = R_{23}(v-w;\eta)\,R_{13}(u-w;\eta)\,R_{12}(u-v;\eta) \]and the three-point Casorati Wronskians on \(Gr(2,4)\) satisfy Baxter’s \(TQ\) difference equation identically.
Rust + WebAssembly (
wasm32-unknown-unknown) + WebGL2 GLSL Implementation: All seven multi-slit / multi-lane (\(N > 0\)) models (Fraunhofer,HuygensSteiner,Gr24RealPlucker,Gr24ComplexTwistor,PilotWave,Wigner,Gr24Unphased) are implemented in src/signals/numerical_adapter/src/double_slit.rs with WebGL2 (#version 300 es) shaders in double_slit.vert.glsl and double_slit.frag.glsl, parameterized bynum_slits > 0,slit_width,slit_separation,barycentric_shift,delta_oam, andazimuth_phi.Revised Semi-Dirac Soliton Bus, Slow-Light CROW Delay Lines, Tiered 128-to-64-Bit RDMA LUT-CORDIC QRAM, & Integrated Multi-Band (\(405\text{–}1550\text{ nm}\)) CNC / \(c\text{-BAs}\) Photonics (
semi_dirac_soliton_bus_crow_rdma_and_multiband_cnc_cbas_photonics_identities): In grassmannian-semi-dirac-soliton-bus-crow-rdma-qram-kicad-paper.md (Paper 33) and grassmannian-multiband-1550nm-photonics-cnc-repeaters-cbas-homodyne-kicad-paper.md (Paper 34), we refine the Soliton Bus with:\(532\text{ nm}\) LCS Strain-Locked Semi-Dirac Ring-Core & \(C_8\) Star-Via Channels: Enforcing \(v_{g,x}(0, m_x^*) = 0\), dispersionless \(\hat{y}\) soliton propagation \(\sigma_y^2(t) = \sigma_{y,0}^2\), \(100\times\) RIE sidewall \(D_{\mathrm{it}}\) suppression, and GHz ballistic Klein switching (\(\mathcal{R}_{\mathrm{Klein}}(10) = 101\)),
\(\mathrm{CO}_2\)-Carbonate \(5\times\) \(\chi^{(3)}\)
CPHASE/CNOTGate Compression (co2CarbonateChi3CphaseLength) & Slow-LightN-LIGCROW Delay Lines (crowSlowLightDelayLength): Compressing the \(24\text{ ns}\) RFSoC CORDIC buffer from \(4.8\text{ m}\) (\(n_g = 1.5\)) down to \(24\text{ mm}\) (\(n_g = 300\)),Tiered 128-to-64-Bit QNIC RDMA Header Stripping (
tieredQnicStrippedPayloadBits), LUT-Seeded CORDIC Thermal-Drift Cancellation (lutPlusCordicOamPhase), & \(37.5\%\) PWM 4K Cryo Budget (nligInternalPumpAvgPowerMw) (\(105.47\text{ mW} < 110\text{ mW}\) across 250 nodes),Periodic \(10\text{ m}\) / \(100\text{ m}\) Cellulose Nanocrystal (CNC) \(\chi^{(2)}\) PSA Signal Boosters (
cncPeriodicBoosterNetLinkGainDb,cncCheckpointCount), \(590\text{ nm}\) \(n\)-Adamantane NV Purcell Dowsing (nvPurcellFactorNormalized\(> 12\)), and \(1550\text{ nm}\) Inverted 3D Adiabatic Scarf-Joint Tapers into Cubic Boron Arsenide (\(c\text{-BAs}\)) Homodyne Detectors (adiabaticScarfTaperLoss < fresnelButtJointReflectance), with verified KiCAD v8 (.kicad_mod,.kicad_sch,.kicad_pcb,.kicad_vol), GDSII (.gds), and IOF/PROV-O (_CBOM.yaml-ld) hardware artifacts insrc/signals/kicad/semi_dirac/.
Scholarly References¶
Travers, J. C., Grigorova, T. F., Brahms, C., and Belli, F. (2019), High-energy pulse self-compression and ultraviolet generation through soliton dynamics in hollow capillary fibres. Experimental hollow-capillary self-compression and UV dispersive-wave generation.
Travers, J. C. (2024), Optical solitons in hollow-core fibres. Review of gas-filled hollow-core propagation, self-compression, Raman shifting, photoionization, plasma, and dispersive-wave effects.
Kivshar, Y. S., and Quiroga-Teixeiro, M. L. (1993), Influence of cross-phase modulation on soliton switching in nonlinear optical fibers. Coupled nonlinear-fibre model for XPM-mediated soliton switching.
Wang, A. et al. (2018), Directly using 88-km conventional multi-mode fiber for 6-mode orbital angular momentum multiplexing transmission. The title says 88 km, while the abstract reports 8.8 km of OM4 fibre; the model follows the abstract and records 120-Gbit/s QPSK, six OAM mode groups, and 2x2 or 4x4 MIMO equalization.
Evidence Boundary¶
The implementation does not establish:
room-temperature soliton stability in N-LIG or rGO-Vitrimer;
preservation of a quantum state through a proposed material bus;
single-photon-strength Kerr coupling;
nondestructive parity measurement;
entropy siphoning or vacuum-noise removal;
a fault-tolerant QPU or QRAM architecture.
QECLean was evaluated as a possible adapter. Its cached artifacts were built against a different mathlib context from Signals, so the public bus module uses a self-contained finite-matrix layer instead of making QECLean a hard dependency. The QECLean source remains available for future adapter work after toolchain alignment.
Soliton-Bus Quantum Error-Coding Plan¶
Recovered design choices¶
The chat corpus search was case-insensitive literal soliton over
data/chats/*.md only. rg was unavailable in the active terminal, so the
equivalent grep -i search was used; it found 22 Markdown files. Detailed
review focused on the processor/soliton and hardware-architecture chats cited
below. These chats recover proposals, not experimental validation.
These choices belong to separate axes: a design chooses how signals are addressed, how each code block encodes a state, and how checks are measured. They should not be collapsed into one meaning for “multiplexing.”
Hierarchical optical addressing. The proposal uses WDM as a coarse depth/layer selector, OAM or MDM as a finer channel selector, and a thermo-optic switch as an active route into an ancilla or memory layer. The chats also propose TDM to reuse a waveguide at different pulse times (depth and OAM routing, time-bin reuse). Use in v1: represent these as address/scheduling coordinates only. Address separation does not prove low crosstalk or independent quantum channels.
Port graph with an ancilla hub. The proposed star has data leaves reached through a central ancilla, with bus operations intended to support stabilizer measurements (star and bus-connected checks, paper architecture). Use in v1: call each physical endpoint a
BusPort; represent possible interactions with an explicit coupling relation. A port is not itself a code qubit or a stabilizer. The measurement order, ancilla reuse, fault propagation, and photonic resource/measurement primitive still need specification.Multiplexed OAM qudit. An alternative is to use a finite OAM basis as the data state, so mode shifts, phases, leakage, and mode mixing are data errors rather than just routing errors. The existing OAM-100 record is readiness metadata: the review explicitly says it lacks an OAM encoding map, syndrome readout, and recovery, and requires mode-dependent loss and crosstalk characterization (OAM boundary and next measurements, QEC readiness fields). Defer as a separate qudit-code project. A coherent superposition over OAM modes is one qudit state, not a collection of independent addressed channels.
Propagating GKP/CV state. A grid state with homodyne syndrome measurements is a distinct continuous-variable encoding path. The paper review describes the cited optical work as a logical-state precursor, not completed fault-tolerant computation, and the qutrit/ququart break-even experiment is not an OAM experiment (optical-state boundary, qudit experiment boundary). Keep outside the first qubit/erasure API.
Layer-code geometry. Layer codes are a CSS-to-3D topological-code construction: their layers and 1D junctions come from Tanner incidences. They are not optical wavelength layers or OAM channels. The paper’s construction supplies mathematical code properties, not a photonic decoder, threshold, or hardware benchmark (Layer-code review). Treat this as a later code-family contribution, independent of the optical address scheme.
First implementation decision¶
For the first implementation, WDM, MDM, OAM, polarization, and TDM are
transport/address dimensions. QEC is defined over an abstract finite set
of qubit blocks, independently of which optical degree of freedom eventually
encodes each block. This matches the existing LaneAddress/LaneSelector
boundary and lets QECLean prove qubit-code facts without making claims about
N-LIG, OAM devices, or a quantum bus. OAM-as-data remains an explicit
alternative encoding, never an implicit interpretation of oamCharge.
Use port for the hardware endpoint and address for the multiplex selector:
BusPortidentifies a coupler, interface, detector, or check-measurement endpoint. It is distinct fromLaneAddress; multiple addresses may be routed through one port at different times.PortCoupling(or a finite port graph) records which endpoints can interact and with what calibrated coupling/crosstalk. Do not define physical adjacency as consecutiveFinindices or infer it from OAM charge.CodeBlockPlacementmaps each abstract code-block ID to its required port and lane address(es). Require injectivity where resources must be distinct; model time-shared resources with an explicit schedule rather than pretending they are separate hardware.An
EncodingChoicestates whether the eventual data encoding is an abstract qubit, a specified qubit encoding, an OAM qudit of dimensiond, or a CV/GKP mode. The v1 Signals contract records the choice and its evidence status; it does not prove that a proposed encoding is physically realized.
Signals work¶
Add a focused Signals/SolitonQEC.lean module under Signals.Pending, reusing
Signals.SolitonBus.LaneAddress, BusNetwork, and the existing unit and
bounded-factor wrappers. Keep it out of the verified classical transport API
until its fields describe calibrated observations or purely mathematical
invariants.
The deployment/noise contract should make these inputs explicit:
finite code-block and port indices, address-to-port placement, and the selected encoding interpretation;
a measured or assumed port-coupling graph, including which nearby signals can produce correlated faults;
mode-resolved loss with a distinction between flagged erasure and unflagged loss, plus detector efficiency and false/missed-flag rates;
mode crosstalk, phase/timing error, check-readout error, and correlated error support, each with units or normalization, uncertainty, calibration status, and provenance where available;
a syndrome-extraction/readout contract that says which check is measured, by what photonic primitive, with what outcome and disturbance bounds.
Add focused examples for unique and colliding addresses, two addresses routed
through one scheduled port, a flagged versus unflagged loss, and a correlated
neighbor fault. These tests validate record laws and reject missing
assumptions; they do not establish QEC performance. In particular, the
existing XPM phase law is not a QND parity measurement, and the proposed
room-temperature/no-dispersion, 10 GHz, and entropy-siphoning statements in
paper.md remain design claims, not fields to promote to verified facts
(paper architecture and claims,
paper-model-review evidence boundary).
QECLean contribution¶
Add a dependency-free, qubit-stabilizer erasure API in a new logical-framework
module such as
QEC/Stabilizer/Framework/Core/Logical/ErasureCorrection.lean, exported
through the existing Core.Logical and Core umbrellas. Its public input is
a known erased support E : Finset (Fin n); define erasure correctability by
the absence of a nontrivial logical Pauli supported entirely inside E,
including the project’s phase-equivalence convention.
Prove the two useful interfaces:
The stabilizer-code erasure criterion: the Pauli error set supported in
Eis jointly correctable exactly when no nontrivial logical operator is supported inE.The distance corollary: for a code of distance
d, every known erasure set withE.card < dis correctable. This is the erasure bound; do not replace it with the unknown-error bound2t < d.
Use the existing Pauli support, logical-operator, and code-distance
abstractions. Add a small checked example with the existing [[5,1,3]] code
showing correction of a single known erased qubit, plus a boundary example
where an erased set contains a logical support. This theorem is a code
property, not an erasure decoder, channel model, or hardware threshold. Keep
the work independent of Signals and Physlib; QECLean’s Lake configuration
already uses mathlib and its own Lean tooling, and this contribution needs no
new dependency. The existing Layer scaffold
can use the API later, but deriving its defect stabilizers is a separate task.
Cross-project handoff and gates¶
Do not import either Lean library into the other. For the first cross-check, maintain one tiny documented fixture containing only the finite block IDs, address/port placement, X/Z check data, erased-block set, and code parameters. Signals checks placement and declared calibration/noise fields; QECLean checks the code and erasure theorem. Keep physical observations and units on the Signals side, not in QECLean.
The implementation sequence is:
Add and test the Signals Pending deployment/noise contract.
Add the generic QECLean erasure criterion and distance corollary; test the
[[5,1,3]]one-erasure case.Instantiate one finite fixture on both sides without a package dependency.
Only after detector and channel calibration, add a measured noise model and assess a concrete syndrome circuit/decoder. Keep OAM-qudit codes, CV/GKP codes, a full Layer-code lift, room-temperature operation, threshold, scalable throughput, and thermodynamic cooling claims outside v1.
For docs-only changes, build the Sphinx docs and run git diff --check. When
code is added, also run the Signals build and QECLean’s focused Lean build.
Validation¶
From src/signals:
lake build Signals SignalsTests
The focused tests cover multiplex selector matching, demultiplexing, Boolean
NAND identities, parity, routing-map involutions, operator inventory counts,
and matrix-vector application. The build still reports the repository’s
pre-existing Physlib if_pos deprecation warning.