Homogeneous acoustic-medium parameters in normalized SI-style units.
- density : ℝ
- density_pos : 0 < self.density
- soundSpeed : ℝ
- soundSpeed_pos : 0 < self.soundSpeed
- attenuationPerLength : ℝ
- attenuation_nonnegative : 0 ≤ self.attenuationPerLength
Instances For
Plane-wave acoustic impedance derived from density and sound speed.
Instances For
Acoustic impedance is positive for a positive-density medium.
A finite-frequency acoustic wave used for transfer experiments.
- frequencyHz : ℝ
- frequency_positive : 0 < self.frequencyHz
- pressureAmplitude : ℝ
- pressureAmplitude_nonnegative : 0 ≤ self.pressureAmplitude
- medium : Medium
Instances For
Plane-wave acoustic intensity from RMS pressure and acoustic impedance.
Instances For
Acoustic intensity is nonnegative.
A transfer experiment for an ultrasonic wave.
The electromagnetic or mechanical source is represented by the existing
passive LinkBudget; transmitter and receiver conversion efficiencies are
additional measured factors.
- wave : Wave
- ultrasonicFrequency : 20000 < self.wave.frequencyHz
- link : Propagation.LinkBudget
- apertureArea : ℝ
- apertureArea_pos : 0 < self.apertureArea
- transmitterEfficiency : Propagation.BoundedFactor
- receiverEfficiency : Propagation.BoundedFactor
- sourcePowerLaw : self.link.sourcePower.watts = self.wave.intensity * self.apertureArea
Instances For
Incident acoustic power through the modeled transducer aperture.
Instances For
Incident acoustic power is nonnegative.
Power delivered to the receiver after acoustic transduction.
Instances For
Acoustic transfer power is nonnegative.
Passive acoustic transduction cannot deliver more than link-received power.
Passive acoustic transfer cannot deliver more power than its source.
Passive acoustic transfer cannot deliver more power than incident power.
A normalized one-dimensional acoustic two-port transfer matrix.
The state convention is pressure and particle velocity. The entries are measured or supplied by a calibrated acoustic solver; this record does not derive them from an assumed DDF constitutive law.
- a : ℂ
- b : ℂ
- c : ℂ
- d : ℂ
Instances For
Identity transfer matrix for a zero-length acoustic path.
Instances For
Cascade two acoustic two-port matrices in physical path order.
Instances For
The pressure/velocity transmission denominator for real source and load impedances.
Instances For
Power transmission for a calibrated acoustic two-port between real ports.
This standard transfer-matrix relation preserves phase and layer ordering, unlike an averaged-permittivity or scalar mixture estimate.
Instances For
A material layer with explicit acoustics and its supplied two-port fit.
- materialReference : String
- materialReference_nonempty : self.materialReference ≠ ""
- medium : Medium
- thickness : Units.Length
- transferMatrix : AcousticTransferMatrix
- transferResidual : ℝ
- transferResidual_nonnegative : 0 ≤ self.transferResidual
- transferTolerance : ℝ
- transferTolerance_nonnegative : 0 ≤ self.transferTolerance
- transferWithinTolerance : self.transferResidual ≤ self.transferTolerance
Instances For
A boundary between acoustic layers, with power partition and a supplied phase-aware two-port fit.
- interfaceReference : String
- interfaceReference_nonempty : self.interfaceReference ≠ ""
- response : Propagation.InterfaceResponse
- transferMatrix : AcousticTransferMatrix
- transferResidual : ℝ
- transferResidual_nonnegative : 0 ≤ self.transferResidual
- transferTolerance : ℝ
- transferTolerance_nonnegative : 0 ≤ self.transferTolerance
- transferWithinTolerance : self.transferResidual ≤ self.transferTolerance
Instances For
Compose the entrance boundary, then each layer and its exit boundary.
For N layers, a valid path supplies N + 1 interfaces. The fallback cases
make this helper total; LayeredAcousticPath.interface_count selects the
physical case.
Instances For
A frequency-specific acoustic path through an ordered stack.
Each layer retains its own material properties, thickness, and transfer fit; each interface retains reflection/absorption/transmission and phase-aware fit. The path-level transfer is the ordered cascade, not an arithmetic average.
- frequency : Units.Frequency
- sourceImpedance : ℝ
- sourceImpedance_positive : 0 < self.sourceImpedance
- loadImpedance : ℝ
- loadImpedance_positive : 0 < self.loadImpedance
- layers : List AcousticPathLayer
- layers_nonempty : self.layers ≠ []
- interfaces : List AcousticPathInterface
- interface_count : self.interfaces.length = self.layers.length + 1
- transferMatrix : AcousticTransferMatrix
- transferMatrixLaw : self.transferMatrix = AcousticTransferMatrix.orderedCascade self.layers self.interfaces
- transferDenominator_nonzero : self.transferMatrix.transmissionDenominator self.sourceImpedance self.loadImpedance ≠ 0
- powerTransmission : Propagation.BoundedFactor
- powerTransmissionLaw : self.powerTransmission.value = self.transferMatrix.powerTransmission self.sourceImpedance self.loadImpedance
- phaseDelay : Units.Duration
- phaseDelay_nonnegative : 0 ≤ self.phaseDelay.seconds
- calibrationResidual : ℝ
- calibrationResidual_nonnegative : 0 ≤ self.calibrationResidual
- calibrationTolerance : ℝ
- calibrationTolerance_nonnegative : 0 ≤ self.calibrationTolerance
- calibrationWithinTolerance : self.calibrationResidual ≤ self.calibrationTolerance
- artifactReference : String
Instances For
Static material identity and thickness, excluding state-conditioned acoustic properties and transfer fits.
Instances For
Static interface identity, excluding its state-conditioned response fit.
Instances For
Check the fixed physical stack and port impedances while allowing acoustic properties and measured transfer matrices to vary with material state.
Instances For
Total physical thickness of an ordered acoustic path.
Instances For
End-to-end ultrasonic power transfer with explicit transmitter, path, and receiver energy partitions.
- path : LayeredAcousticPath
- electricalInputPower : Units.Power
- electricalInput_nonnegative : 0 ≤ self.electricalInputPower.watts
- transmitterEfficiency : Propagation.BoundedFactor
- acousticLaunchPower : Units.Power
- acousticLaunchPower_nonnegative : 0 ≤ self.acousticLaunchPower.watts
- transmitterLossPower : Units.Power
- transmitterLossPower_nonnegative : 0 ≤ self.transmitterLossPower.watts
- transmitterConversionLaw : self.acousticLaunchPower.watts = self.transmitterEfficiency.value * self.electricalInputPower.watts
- transmitterEnergyBalance : self.electricalInputPower.watts = self.acousticLaunchPower.watts + self.transmitterLossPower.watts
- auxiliaryPathInputPower : Units.Power
- auxiliaryPathInputPower_nonnegative : 0 ≤ self.auxiliaryPathInputPower.watts
- acousticReceivedPower : Units.Power
- acousticReceivedPower_nonnegative : 0 ≤ self.acousticReceivedPower.watts
- reflectedPower : Units.Power
- reflectedPower_nonnegative : 0 ≤ self.reflectedPower.watts
- absorbedPower : Units.Power
- absorbedPower_nonnegative : 0 ≤ self.absorbedPower.watts
- distributedLossPower : Units.Power
- distributedLossPower_nonnegative : 0 ≤ self.distributedLossPower.watts
- pathTransmissionLaw : self.acousticReceivedPower.watts = self.path.powerTransmission.value * (self.acousticLaunchPower.watts + self.auxiliaryPathInputPower.watts)
- pathEnergyBalance : self.acousticLaunchPower.watts + self.auxiliaryPathInputPower.watts = self.acousticReceivedPower.watts + self.reflectedPower.watts + self.absorbedPower.watts + self.distributedLossPower.watts
- receiverEfficiency : Propagation.BoundedFactor
- deliveredElectricalPower : Units.Power
- deliveredElectricalPower_nonnegative : 0 ≤ self.deliveredElectricalPower.watts
- receiverLossPower : Units.Power
- receiverLossPower_nonnegative : 0 ≤ self.receiverLossPower.watts
- receiverConversionLaw : self.deliveredElectricalPower.watts = self.receiverEfficiency.value * self.acousticReceivedPower.watts
- receiverEnergyBalance : self.acousticReceivedPower.watts = self.deliveredElectricalPower.watts + self.receiverLossPower.watts
Instances For
The layered UPT ledger closes across conversion, path, and receiver losses.
Delivered UPT power cannot exceed the electrical and auxiliary path inputs.
An observed acoustic-transfer result with a stated model residual.
- predictedPower : ℝ
- observedPower : ℝ
- tolerance : ℝ
- tolerance_nonnegative : 0 ≤ self.tolerance
- residual : ℝ
- residualLaw : self.residual = self.observedPower - self.predictedPower
Instances For
A measurement is consistent with its transfer model within tolerance.
Instances For
The consistency predicate unfolds to the stated residual bound.
Adapt an acoustic residual to the shared measurement contract.