Measured material parameters for a lignin-vitrimer dielectric track.
The record does not assert that a particular bio-derived formulation has these properties; each value is an experimental or separately justified input.
- relativePermittivity : ℝ
- relativePermittivity_pos : 0 < self.relativePermittivity
- lossTangent : ℝ
- lossTangent_nonnegative : 0 ≤ self.lossTangent
- tuningRange : ℝ
- tuningRange_nonnegative : 0 ≤ self.tuningRange
- moistureSensitivity : Propagation.BoundedFactor
Instances For
A volume-distributed polarization-current source with finite support.
- supportVolume : Units.Volume
- supportVolume_pos : 0 < self.supportVolume.cubicMeters
- sourceCount : ℕ
- sourceCount_positive : 0 < self.sourceCount
- currentDensityAmplitude : Units.PolarizationCurrentDensity
- currentDensityAmplitude_nonnegative : 0 ≤ self.currentDensityAmplitude.amperesPerSquareMeter
- directionality : ℝ
- directionality_nonnegative : 0 ≤ self.directionality
Instances For
A directional broadband antenna driven by a distributed polarization current.
The phase-pattern speed is kept separate from group and information speeds. This permits a superluminal phase or spot speed as a kinematic input without encoding superluminal signal transmission.
- material : LigninVitrimerDielectric
- polarizationCurrent : VolumeDistributedPolarizationCurrent
- carrierFrequency : Units.Frequency
- carrierFrequency_pos : 0 < self.carrierFrequency.hz
- bandwidth : Units.Frequency
- trackLength : Units.Length
- trackLength_pos : 0 < self.trackLength.meters
- sweepDuration : Units.Duration
- sweepDuration_pos : 0 < self.sweepDuration.seconds
- sweepSpeed : Units.Speed
- sweepSpeedLaw : self.sweepSpeed.metersPerSecond = self.trackLength.meters / self.sweepDuration.seconds
- phasePatternSpeed : Units.Speed
- phasePatternSpeed_pos : 0 < self.phasePatternSpeed.metersPerSecond
- groupSpeed : Units.Speed
- groupSpeed_pos : 0 < self.groupSpeed.metersPerSecond
- groupSpeed_causal : self.groupSpeed.metersPerSecond ≤ Units.vacuumSpeedOfLight
- informationSpeed : Units.Speed
- informationSpeed_pos : 0 < self.informationSpeed.metersPerSecond
- informationSpeed_causal : self.informationSpeed.metersPerSecond ≤ Units.vacuumSpeedOfLight
- inputPower : Units.Power
- inputPower_nonnegative : 0 ≤ self.inputPower.watts
- radiatedPower : Units.Power
- radiatedPower_nonnegative : 0 ≤ self.radiatedPower.watts
- radiationEfficiency : Propagation.BoundedFactor
- radiatedPowerLaw : self.radiatedPower.watts = self.inputPower.watts * self.radiationEfficiency.value
Instances For
A phase pattern or laser spot is superluminal relative to vacuum light speed.
Instances For
The track sweep speed follows its measured length and duration.
The information speed remains within the supplied causal envelope.
A passive directional broadband antenna cannot radiate more power than it receives.
The field-orientation label of a resonator mode.
The longitudinal label describes a field component in the modeled structure; it does not mean that the mode is a massive Proca excitation.
- transverse : ResonatorMode
- longitudinal : ResonatorMode
Instances For
Application classes identified in the CW research notes.
- oceanMetrology : CWApplication
- waveguideTransport : CWApplication
- pclpNanolithography : CWApplication
- mimoAcousticMixing : CWApplication
- antiFireSuppression : CWApplication
- frcFusion : CWApplication
- topologicalThruster : CWApplication
- argonPowerPlant : CWApplication
- wirelessPower : CWApplication
- deepSpaceCommunications : CWApplication
Instances For
Controls that a CW application may require beyond a carrier alone.
- phaseReference : Bool
- activeMask : Bool
- convergentBeams : Bool
- rangeModulation : Bool
- massiveModeHypothesis : Bool
Instances For
The control requirements implied by each application class in the source chat. These flags classify proposed architectures; they do not validate them.
Instances For
An active rGO-vitrimer mask with finite programmable phase/amplitude range.
- elementCount : ℕ
- elementCount_positive : 0 < self.elementCount
- phaseModulationRange : ℝ
- phaseModulationRange_nonnegative : 0 ≤ self.phaseModulationRange
- amplitudeModulationRange : ℝ
- amplitudeModulationRange_nonnegative : 0 ≤ self.amplitudeModulationRange
- controlPower : Units.Power
- controlPower_nonnegative : 0 ≤ self.controlPower.watts
Instances For
Two or more coherent CW beams with a declared intersection region.
- beamCount : ℕ
- beamCount_at_least_two : 2 ≤ self.beamCount
- driveFrequency : Units.Frequency
- driveFrequency_pos : 0 < self.driveFrequency.hz
- intersectionArea : Units.Area
- intersectionArea_pos : 0 < self.intersectionArea.squareMeters
- phaseAlignment : Propagation.BoundedFactor
Instances For
A continuous-wave resonator with measured enhancement and power loss.
- mode : ResonatorMode
- resonantFrequency : Units.Frequency
- resonantFrequency_pos : 0 < self.resonantFrequency.hz
- driveFrequency : Units.Frequency
- driveFrequency_pos : 0 < self.driveFrequency.hz
- resonanceMatch : self.driveFrequency.hz = self.resonantFrequency.hz
- drivePower : Units.Power
- drivePower_nonnegative : 0 ≤ self.drivePower.watts
- intracavityPower : Units.Power
- intracavityPower_nonnegative : 0 ≤ self.intracavityPower.watts
- enhancementFactor : ℝ
- enhancementFactor_ge_one : 1 ≤ self.enhancementFactor
- intracavityPowerLaw : self.intracavityPower.watts = self.drivePower.watts * self.enhancementFactor
- emittedPower : Units.Power
- emittedPower_nonnegative : 0 ≤ self.emittedPower.watts
- dissipatedPower : Units.Power
- dissipatedPower_nonnegative : 0 ≤ self.dissipatedPower.watts
- passivePowerBalance : self.emittedPower.watts + self.dissipatedPower.watts = self.drivePower.watts
Instances For
A resonator is continuously driven when its CW drive power is positive.
Instances For
The resonator's drive and resonance frequencies match.
Intracavity enhancement is no smaller than drive power under the supplied enhancement model.
Passive resonator output cannot exceed its supplied drive power.
Readiness data for a CW application, with explicit mask/beam requirements.
This is a testable interface contract. It does not establish that the stated application works or that a CW resonator emits a massive longitudinal mode.
- application : CWApplication
- resonator : ContinuousWaveResonator
- activeMask : Option RGOVitrimerActiveMask
- convergentBeams : Option ConvergentCWBeams
- rangeModulationEnabled : Bool
- informationSpeed : Units.Speed
- informationSpeed_pos : 0 < self.informationSpeed.metersPerSecond
- informationSpeed_causal : self.informationSpeed.metersPerSecond ≤ Units.vacuumSpeedOfLight
- activeMaskRequirement : self.application.requirements.activeMask = false ∨ self.activeMask.isSome = true
- convergentBeamRequirement : self.application.requirements.convergentBeams = false ∨ self.convergentBeams.isSome = true
- rangeModulationRequirement : self.application.requirements.rangeModulation = false ∨ self.rangeModulationEnabled = true
Instances For
A ready application exposes its causal information-speed bound.
The active-mask requirement is an explicit readiness condition.
The convergent-beam requirement is an explicit readiness condition.
A Rydberg-EIT field observation with a calibrated quadratic Stark response.
- probeFrequency : Units.Frequency
- probeFrequency_pos : 0 < self.probeFrequency.hz
- couplingFrequency : Units.Frequency
- couplingFrequency_pos : 0 < self.couplingFrequency.hz
- fieldAmplitude : Units.ElectricFieldAmplitude
- fieldAmplitude_nonnegative : 0 ≤ self.fieldAmplitude.voltsPerMeter
- starkCoefficient : ℝ
- starkCoefficient_nonnegative : 0 ≤ self.starkCoefficient
- starkShift : ℝ
- starkShiftLaw : self.starkShift = self.starkCoefficient * self.fieldAmplitude.voltsPerMeter ^ 2
Instances For
The calibrated Stark shift is nonnegative for a nonnegative coefficient.